Repair Ninja Experiment
Repair Ninja Experiment
Any ideas to fix/replace the black sponge foam "curtains" on the Ninja Experiment? Seeing as though these are getting old and the foam will begin to fall apart I was wondering if anyone had any creative ideas on what type of material could be used to replace it.
The white caps that hold the foam in place in the center of the frame appear to be glued/bonded to the clear plastic making the foam difficult to replace. One thing I was considering would be to install a replacement on the outside of the cap. In a perfect world, the mod would be reversible and not permanent. I was thinking about felt or velvet secured via double-sided tape. Maybe a small piece of thin decorative ribbon along the outer edge of the felt to make it look nice?
The white caps that hold the foam in place in the center of the frame appear to be glued/bonded to the clear plastic making the foam difficult to replace. One thing I was considering would be to install a replacement on the outside of the cap. In a perfect world, the mod would be reversible and not permanent. I was thinking about felt or velvet secured via double-sided tape. Maybe a small piece of thin decorative ribbon along the outer edge of the felt to make it look nice?
- David DeTenyo
- Global Moderator
- Posts: 3041
- Joined: Thu Jul 18, 2013 6:51 am
- Location: Belgium
- Contact:
Re: Repair Ninja Experiment
I have tried to take apart a Ninja Experiment ending up braking it into pieces. So do not try to take it apart.
I have also been thinking about putting some velvet or sponge-like material on the outside, never tried it yet though, but it should work. Do take in mind that you'll Ninja Experiment probably looses some value when you're altering it.
I have also been thinking about putting some velvet or sponge-like material on the outside, never tried it yet though, but it should work. Do take in mind that you'll Ninja Experiment probably looses some value when you're altering it.
AKA Killertweety
https://tenyobe.blogspot.be/
https://tenyobe.blogspot.be/
- David DeTenyo
- Global Moderator
- Posts: 3041
- Joined: Thu Jul 18, 2013 6:51 am
- Location: Belgium
- Contact:
Re: Repair Ninja Experiment
Ninja Experiment is a must-have for all Tenyo collectors or even people who just like to collect nice micro magic. It was one of the items I had no idea how it worked after seeing Roberto's video (which was shot in 'ideal' conditions
).
Do take in mind when you receive it and want to perform it the lightning conditions have to be good or your spectors will probably find out how it works.
They sometimes pop up on Ebay and the ones in used condition (often with some tears in the black tissue - you should always ask the seller about this) sell for reasonable prices (125 - 250 USD).
![Wink ;)](./images/smilies/icon_e_wink.gif)
Do take in mind when you receive it and want to perform it the lightning conditions have to be good or your spectors will probably find out how it works.
They sometimes pop up on Ebay and the ones in used condition (often with some tears in the black tissue - you should always ask the seller about this) sell for reasonable prices (125 - 250 USD).
AKA Killertweety
https://tenyobe.blogspot.be/
https://tenyobe.blogspot.be/
Re: Repair Ninja Experiment
Ninja Experiment is a wonderful trick! I love the mechanics of its working. I would like to see a nice wooden version of this one!
I suspect the reason that it is so expensive these days probably has a lot to do with very few being made as well people potentially throwing away the ones with torn or damaged foam. It's up there with Mirage and Sidetrack, tricks for which people may accidentally break and throw away.
I suspect the reason that it is so expensive these days probably has a lot to do with very few being made as well people potentially throwing away the ones with torn or damaged foam. It's up there with Mirage and Sidetrack, tricks for which people may accidentally break and throw away.
Re: Repair Ninja Experiment
Instead of replacing the foam with more foam, you might consider gluing on each side of the slot some of the really fat, fuzzy pipe cleaners available in craft stores. These should "close around" the pencils better than foam. Epoxy or Super Glue gel should work well with the plastic.
Re: Repair Ninja Experiment
Found a solution to the worn sponge problem.
Removed sponge, modelled four balsa wood baton strips, attached stick-on soft brush draught excluder tape.
A baton sticks to each side of slots with double-sided tape, brushes meet in the middle.
Really pleased with the finished result, balsa colour compliments colour scheme, pencils glide through the brushes, giving perfect cover. Brushes are durable, easily replaceable. Although batons secure, they're easily removable, leaving no trace.
Such a strong effect, thought it worthy to give it a new lease of life.
Removed sponge, modelled four balsa wood baton strips, attached stick-on soft brush draught excluder tape.
A baton sticks to each side of slots with double-sided tape, brushes meet in the middle.
Really pleased with the finished result, balsa colour compliments colour scheme, pencils glide through the brushes, giving perfect cover. Brushes are durable, easily replaceable. Although batons secure, they're easily removable, leaving no trace.
Such a strong effect, thought it worthy to give it a new lease of life.
Re: Repair Ninja Experiment
Great idea! Do you have a photo you can share of how it turned out?
- Richard W
- Global Moderator
- Posts: 1529
- Joined: Thu Jul 18, 2013 12:43 am
- Location: Phoenix Arizona U.S.A. Planet Earth
Re: Repair Ninja Experiment
Think it needs a little more information. ![😉](//cdn.jsdelivr.net/emojione/assets/3.1/png/64/1f609.png)
![😉](http://cdn.jsdelivr.net/emojione/assets/3.1/png/64/1f609.png)
"let's continue on with this carnival-like atmosphere"
Re: Repair Ninja Experiment
Raymond,
I received your message about posting pictures.
You should be able to.
Make sure you are in the "Full Editor and Preview" mode
then click on the "Attachments" tab
next on the "Add files" button
then navigate to find the file on your computer
then "Place inline" button
I think the file size limit is 1 meg (1000K)
The file below is 300K
I received your message about posting pictures.
You should be able to.
Make sure you are in the "Full Editor and Preview" mode
then click on the "Attachments" tab
next on the "Add files" button
then navigate to find the file on your computer
then "Place inline" button
I think the file size limit is 1 meg (1000K)
The file below is 300K
You do not have the required permissions to view the files attached to this post.
Re: Repair Ninja Experiment
I`ve successfully fixed the foam! Ill try and find the info
Re: Repair Ninja Experiment
Here ya go, assuming you are on the facebook tenyo collectors page? Otherwise you may not be able to see these...
https://www.facebook.com/groups/tenyoma ... 348985233/
https://www.facebook.com/groups/tenyoma ... 492320752/
https://www.facebook.com/groups/tenyoma ... 348985233/
https://www.facebook.com/groups/tenyoma ... 492320752/
Re: Repair Ninja Experiment
Regarding my Ninja Experiment modification, using balsa batons and soft brush stick-on draught excluder tape, photo's now on view in the 'Performing Tenyo' Topic.